Acrylonitrile butadiene styrene (ABS) is a staple polymer in professional additive manufacturing due to its consistency and high impact resistance.
Tensile strength (25 mm /min) - 54 MPa
Elongation at break (25mm /min - 25%
Flexural stress (2mm /min) - 77.5 MPa
Density - 1.05g/cm³
Approx. length / kg: 1.75mm - 396m | 2.85mm - 152m
ABS is less brittle than PLA and melts at a higher temperature. It exhibits lower friction than PLA preventing extruder jams and clogging. Due to its nature, we recommend you don't use a layer fan to prevent warping. Also, consider keeping the surface area on the bed to a minimum and to enclose your 3D printer in a box to keep the warmth in. Our ABS filament has been tested to work with closed 3D printers such as the Zortrax m200 with great success.
Our high-grade ABS is in the following products types.
We will continue to work on new colours and materials which will provide excellent results!