Recommended extrude temperature for most printers 198C
- Bowden Drives should extruder at 195C. Too hot are you may experience oozing
Recommended heat bed temperature: 70C. PLA Black WILL print find with no heated bed, just be sure to treat the surface and to ensure it's perfectly flat before printing.
Our black will shimmer once printed. You can achieve a matte finish by using ultra fine grade sand paper. For detailed objects, we recommend using steel wool and a moist cloth.
If you feel that our filament hasn't achieved our quality control out of the box, please contact us and we will arrange a refund.
Please note the below is for references purposes, every printer is different and should be adjusted until excellent results are achieved.
Please comment any questions or suggestions for this page below!